On Fri, 5 Jul 2013, Kirk Wallace wrote: > Date: Fri, 05 Jul 2013 16:29:44 -0700 > From: Kirk Wallace <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: [Emc-users] 6i25 StepGen > > I need to output quadrature stepping from a 6i25. Do I have any options > in this regard, other than bit banging or external circuitry? Thank you.
Sure the Hostmot2 stepgen has 3 output modes: 0 step/dir 1 up/down 2 quadrature Note that the quadrature output rate is 4 times the rate of the other modes (man hostmot2) > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/ > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
