> From: [email protected]
> To: [email protected]
> Date: Thu, 2 May 2013 08:06:10 +0200
> Subject: Re: [Emc-users] Hostmot2-PDM Frequency
>
> >>
> >> Pncconf gives a message that a PDM frequency of 6000 is required and
> >> puts that into the HAL file. Should it not be 6x10^6?
> >>
> >> Rudy
> >
> >
>
> >Its definately supposed to be 6000000 Hz so this is a pncconf bug (Is this
> the latest pncconf?)
>
> >Peter Wallace
> >Mesa Electronics
>
> Yes it came with Linuxcnc 2.5.2 recently downloaded.
>
> Rudy
>
To be fair, the message says 6 Mhz
but as you noted the default is 6000 hz in the combo box.
note the two different units of measure.
I don't remember why the default is 6000 hz but I will fix that.
Thanks
Chris M
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
