So this is in a split collar that you do not want to spread? Can you slide a ring around the collar to keep it from spreading?
Dave On 4/5/2013 11:39 AM, dave wrote: > Hi all, > > The wiki for buttress threads states the buttress threads tend to fail > because only the first 4 threads are load bearing. > > In contrast to that is: > > www.dtic.mil/cgi-bin/GetTRDoc?AD=ADA483296 > > Which uses them in a munition where failure us not usually an > option. ;-) > > Does anyone have any experience or comments on either US or ISO buttress > (pull) threading. > > I'm trying to concentrate the stress axially rather that trying > to spread the collar as 60 degrees do. > > The reason for my concern is that the collar is welded and the more > safety factor I can generate the better. > > TIA > > Dave > > > ------------------------------------------------------------------------------ > Minimize network downtime and maximize team effectiveness. > Reduce network management and security costs.Learn how to hire > the most talented Cisco Certified professionals. Visit the > Employer Resources Portal > http://www.cisco.com/web/learning/employer_resources/index.html > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
