Hi Micheal, I hear you. The problem is that I have to keep a machine just for that hardware. Also it has more than one 5i23. I suppose I will have to do that anyway. The 5i23's will end up being used somewhere so it all starts again :)
On 2013/03/02 12:41 PM, Michael Haberler wrote: > Am 02.03.2013 um 11:27 schrieb Anders Wallin: > >> On Sat, Mar 2, 2013 at 10:13 AM, Marius Liebenberg >> <[email protected]>wrote: >> >>> Hi, >>> I need to do a lot of changes to a customer's system that has 5i23 and >>> other cards installed. I dont have a similar installation to work on so >>> my question is, is there a way to run LinuxCnc or just start it up >>> without functionality, without having the 5i23 installed. Something like >>> a dummy component. I need to make sure all the HAL connections are made >>> and are to the right pins. Once that is done I can take the files to >>> their system and test. >>> >> No, AFAIK. >> >> A build-option where the HAL driver could be built in a "simulator" mode >> would be nice. >> All the HAL-pins would be exposed and available for monitoring, but no real >> hardware would be required. > just emulating the pins with say a Python userland HAL component would be easy > > that wouldnt help beyond loading though since the behaviour would have to be > emulated too or it would be of rather limited use - the first dependency on > an output pin having some non-default value would stop the simulation in its > tracks > > That problem has a $153 solution - which you'd want to put into proportion to > the cost of writing a simulator including behavior > > -m > > > > >> AW >> ------------------------------------------------------------------------------ >> Everyone hates slow websites. So do we. >> Make your web apps faster with AppDynamics >> Download AppDynamics Lite for free today: >> http://p.sf.net/sfu/appdyn_d2d_feb >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_feb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards / Groete Marius D. Liebenberg MasterCut cc Cel: +27 82 698 3251 Tel: +27 12 743 6064 Fax: +27 86 551 8029 Skype: marius_d.liebenberg Skype Me^(TM)! <skype:marius_d.liebenberg?call> Get Skype <http://www.skype.com/go/download> and call me for free. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 130302-0, 2013/03/02 Tested on: 2013/03/02 01:50:54 PM avast! - copyright (c) 1988-2013 AVAST Software. http://www.avast.com ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
