Am 09.07.2012 um 19:17 schrieb Bryce Johnson: > I'm running one of the newer 2.6pre from the buildbot repo. I noticed that > if I stop the operation on a tool change "change to tool 6" and start from > the beginning on the file (tool 1). It asks for tool 6 again instead of > tool 1. If I put in tool 1 and let it run... When it gets to the tool 6 > part it keeps on going thinking that it has tool 6.
Please file a bug including configuration and exact sequence of events here: http://sourceforge.net/tracker/?group_id=6744&atid=106744 thanks - Michael > > I ran into this because I had to do a tool change (and touch off the > workpiece) and instead of hitting "run from line", I hit the l start button > by accident. Is there a better way to do a manual tool change. I saw > people had mentioned Les script, but I'm not sure how that works. > > Bryce > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
