2012/6/27 andy pugh <[email protected]> > On 27 June 2012 13:41, Eugenio Yime Rodriguez <[email protected]> > wrote: > > > * Is possible to use LinuxCNC with QNX ?. > > Anything is possible, but some things are more work than is worthwhile. > What is the reason not to use the existing, supported platform and CPU? > > I just was looking for a small computer, and I found i.mx53 Quick Start Board, very small with touchscreen. It runs linux and QNX, but there is no ARM support in RTAI.
> -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- ME MS Eugenio Yime Rodriguez phD Robotics and Automation Universidad Tecnologica de Bolivar Campus Tecnologico Carlos Velez Pombo Cartagena de Indias Colombia Ph: +57 - 56535200 ext 2067 Cel: +57 - 3008377535 email: [email protected] skype: eugenio.yime ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
