use this example for now: http://git.mah.priv.at/gitweb/emc2-dev.git/shortlog/refs/heads/spinbutton-workaround
I'll eventually push it to v2.5_branch -m Am 26.06.2012 um 10:43 schrieb Viesturs Lācis: > 2012/6/26 Michael Haberler <[email protected]>: >> >> if you get stuck, let me know > > Yes, I got stuck. > The way I understand it - I do need one adjustment to set all the > default, min and max values, increments etc. At least with several > adjustments it was showing only 0 in glade panel. With all those > values in one adjustment it had min of 60 and max of 100, just like I > had set it. > > The thing is that after starting up LinuxCNC it does not set the > default value to 80. It is 0 and, if I put mouse pointer on it and > scroll, then it immediately jumps to minimum value of 60 and then > starts going up. > > So I guess that I have the bug You mentioned. > > The thing is that I do not understand the instruction mentioned there: > "it is better to set it explicitly in an on_realize signal handler > during widget creation" > > So where do I copy that piece of text (with the value of my own > instead of 3.14)? > > -- > Viesturs > > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
