Hi Kirk, there seems to be 3V PPorts also. I think on Asus MOBO AT5NM10? If possible can you investigate that connected to a G540 please?
If someone has a schematic of the G540 (esp. the motherboard) I would be interested. //Lars > -----Original Message----- > From: Kirk Wallace [mailto:[email protected]] > Sent: den 10 april 2012 19:47 ... > > Dan from the DIY-CNC list has loaned a G540 to me (it might be here > Wed.). I plan to investigate this pull-up issue and document it, maybe > on the wiki. One of my hopes is to come up with a "just works" type of > solution. Many of us on this list understand electronics and software > enough to not think twice about adding a resistor here, or a bit check > there, but in the real world of CNC, many people don't want to or can't > get that deeply into the machine's workings. They just want something > they can buy and it just works. LinuxCNC might become more popular if > it had more "just works". > > My first guess is to have the "epp" option added to hal_parport and > have a check box for it in Stepconfig. On the other hand, will the G540 > become popular enough to warrant the effort? > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > ----------------------------------------------------------------------- > ------- > Better than sec? Nothing is better than sec when it comes to > monitoring Big Data applications. Try Boundary one-second > resolution app monitoring today. Free. > http://p.sf.net/sfu/Boundary-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Better than sec? Nothing is better than sec when it comes to monitoring Big Data applications. Try Boundary one-second resolution app monitoring today. Free. http://p.sf.net/sfu/Boundary-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
