On Mon, 19 Mar 2012, Jon Elson wrote: > Date: Mon, 19 Mar 2012 21:39:20 -0500 > From: Jon Elson <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: [Emc-users] SCSI to tape interface > > This sounds OT, but has a tie-in to EMC, as we are trying to be > able to read a tape that has the last work on APT/360 on it. > > I have a CDC Keystone 9-track tape drive that appears to be working > fine. I have a salvaged SCSI to Pertec formatted interface converter > that worked > for a while, and I was able to dump a few blocks off some tapes with > it, then it died! So, does anyone know where to get a SCSI to > Pertec formatted interface converter board? Or, does anyone know > where to get the SCSI interface board for a CDC 92185 tape drive? > > Or, does anyone know where a working 9-track 1600 and/or > 6250 BPI tape drive is that we could read some tapes on? > > Thanks, > > Jon
You might try posting to the classic commputer list. I know several members use 9 track tape drives. <[email protected]> (Or I can cross post if you wish) > Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
