2010/4/7 dave <[email protected]> > > The accuracy of that system depends on how good your home switch is. > > I've always used a dial indicator against the spindle for that type of > measurement. Same concept but easier since you don't have to home. > > Dave > > The accuracy should be good enought. I put the mark on coupler and case. The home is in same step mark near all the time. If not then I know something is wrong. But i have no indication if something is wrong for complete turn. ..and Y coupler is in hidden place hard to see it.
so for now I use g0z0 g0x0y0 and check the coupler. Rehome and report after that should be easyer. (and add a few lines into homming procedure) ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
