On Sat, 2010-03-27 at 12:56 -0400, Tom Easterday wrote: > Has anyone gotten Axis to successfully run remotely connecting directly to > EMC2 (not via VNC)? I want to run Axis on a remote MacBook and connect to an > intel motherboard in my machine. Any pointers on where to start would be > appreciated. > -Tom
I have some old information on running TkEMC on a remote PC (see bottom of page): http://www.wallacecompany.com/machine_shop/EMC2/remote_notes.html http://www.linuxcnc.org/docview/html//gui_tkemc.html Your Mac would need to be able to run .tcl scripts. I am still looking for information on running AXIS as a stand-alone program on a non RTAI PC. My memory fails me, but the last bit I remember is something about AXIS also needing some HAL pins to be disabled. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
