Wow, it worked! Thanks for the great tip Alex! Now the device is no longer [disabled]
For anyone else facing this issue in the future I followed the instructions here: http://www.thecooltool.com/files/dateien_578.pdf Namely: --------------------------------------- A) The file 'emc2' in the directory /etc/modprob.de has to be removed, or even better moved. usern...@computername:~$ sudo mv /etc/modprobe.d/emc2 /emc2 B) Setting up the interface: usern...@computername:~$ sudo modprobe parport_pc usern...@computername:~$ sudo modprobe parport_cs usern...@computername:~$ sudo rmmod ppdev usern...@computername:~$ sudo rmmod lp usern...@computername:~$ sudo rmmod parport_cs usern...@computername:~$ sudo rmmod parport_pc --------------------------------------- Thanks again. Karl On Mar 25, 2010, at 3:36 AM, Alex Joni wrote: > for PCMCIA cards I found that the only way to make them work was to > load the > linux drivers, then unload them. > Specifically parport_cs > > (so do something like: modprobe parport_cs, check /proc/ioports for > your > card, rmmod parport_cs (and dependencies if needed.. been a while, > can't > remember exactly if there were any)). > > Regards, > Alex > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
