A couple of questions -
1. Does anyone know when G52 will be available for EMC?
2. I will be converting a large 3 spindle profiler to EMC after my
current refit to EMC on another machine is complete. The 3 spindle job
currently has a Fanuc 11m control with Fanuc DC drives and motors. They are the
older pwm drives (Not digital). Has anyone ever connected these drives to EMC?
We ran some tests on the bench against the machine production times and EMC cut
the program execution times in half. The Fanuc 11 just couldn't process the
blocks fast enough (point to point). We even ran the 11m in "Machine Lock"
simulation (no servos, just program processing) so the servos aren't the
problem. I have an EMC control built up with motors and drives on a test stand
to run the tests with for the first project. On the second project I would
like to reuse the drives and motors if it is possible. Any thoughts on this?
Congrats to all who work on EMC - It is definitely a contender in the CNC
Control market!
Thanks,
Dave
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
