Hello Eric I have two more questions
Do have any idea which soft pin link to M3 and M4 for spindle rotation. I currently have aVFD set up to recive inputs for cw and ccw rotation. I see there are two types of soft pins (Halui and Motion) and I tried both with no success.These are the signals I have tried "net halui.spindle.runs-forward => hm2-5i23.0.gpio.042.out" and "net motion.spindle-forward=>hm2-5i23.o.gpio.042.out" I have also looked for parameters for these soft pins. :-) My second question is how do you show the spindle control on the AXIS controller menu. I am using the standard HOSTMOT2 config. John ________________________________ From: Eric H. Johnson <[email protected]> To: Enhanced Machine Controller (EMC) <[email protected]> Sent: Mon, November 2, 2009 4:22:25 PM Subject: Re: [Emc-users] (no subject) John, In addition to what Peter said, if I am not mistaken, GPIO 42 maps to pin 37 (output 2). I think you want GPIO 40 (output 0) which should map to pin 33. Regards, Eric Do you have the "is_output" parameter set for GPIO 42? ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
