> Frank, can you please post your homing .ini and .hal on > pastebin.ca, and post a link on this mailing list?
Here are my files. They are for a lathe. Currently only the X axis uses index homing. The configuration for this is the last few lines of the file. It is based on the original hm2-servo config. 9x20Lathe.hal http://pastebin.ca/1435884 9x20Lathe.ini http://pastebin.ca/1435889 The files are very non-standard. After wiring up my 5i20 to port 0->X, 1->Z, 2->Spindle, I discovered that lathe only works when axis.0 is X and axis.2 is Z. So the device numbering is all over the place. My spindle is also set up as a servo, and the ini file section names aren't standard - which I think is what breaks the tuning tool in axis. The hal file also includes my index divider component that allows my to use a 1 to 3 pulley ratio on the spindle servo and still use the servo encoder feedback for sync'ing. ------------------------------------------------------------------------------ Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers & brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, & iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
