Hal Eckhart wrote: > Hi folks, > > I'm doing plasma cutting with files made via SheetCam, and have been > making stuff with EMC intermittently for a few months. This is the > first time I've run into a problem that I couldn't solve by asking > Google. > > I've noticed what seems to me strange behavior when using G64 with any > tolerance setting (Px.xxx) at all. Both G64 with no P number and G61 > work fine, but if I set a number, some small holes are ignored by EMC. > I can't answer this, but I think we need a lot more info on what the G-code for these holes looks like. If you have canned cycles that are drilling holes, that is important info. If you are just doing a Z plunge with G01 moves, that also needs to be made clear. I think you are going to have to post a section of the code that causes the problems for one of the developers to do a test run.
Jon ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
