I have 2 unrelated questions: Cradek mentioned that in the CVS Head version of Emc2/Axis, it is possible to do M6T(X), then touch off for the tool offset and it will automatically adjust thevalue in the tool offset table - I have tried and looked for this feature but to no avail. I have the CVS Head version that I compiled a few weeks ago. It this feature yet to be released? Tomorrow, maybe..? ;-)
Can someone point me to the correct information regarding how to configure the Pluto servo hal file so that the PWM duty cycle max limit can be restricted to 95% ? btw I recently finished a prototype version of Skunkworks' "large brushed servo setup on the cheap" that I call the Samco CL. It is up and running on a Pluto P using Emc2 and the Pluto servo configuration, and you can watch a few videos that I did here. My latest post is #241. http://www.cnczone.com/forums/showthread.php?t=25929&page=21 regards, Tom ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
