On Fri, Dec 05, 2008 at 12:25:43PM -0600, Stuart Stevenson wrote: > Gentlemen, > The Dahlih cut the corners of a mill path. I had described this > previously. Clyde, the operator, told me he ran the path .005 deep and > it showed the path good. He moved the Z down .8, reran the program and > it cut across the g2 corners. It is sitting in the state. Is there > something I could look at to give direction? > thanks > Stuart
With EMC still running, would you please tar up the entire configuration directory, and get us that, and the Gcode file it is running, and a screen shot that shows the incorrect path it took. Also do you know what version it's running, or when you updated the CVS last if it is running TRUNK? Chris ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
