Cool,
Nice to know that others have had same issues....
Best Regards
Kim Mortensen
2008/9/3, Doug Goff <[EMAIL PROTECTED]>:
>
> I used this post -
>
> http://www.cnczone.com/forums/showpost.php?p=382237&postcount=1
>
> to modify one of my systems. It completely eliminated the startup issues
> associated with idle current reduction. I do a lot of operations where Z
> might not make a move for more than 10 seconds - and it would lose steps.
> I need to do this mod on the other router when I get time.
> ** REMEMBER to be very careful when making mods to the HobbyCNC board. It
> is very unforgiving.
> Also John, the settings on the Wiki work with my system as well.
>
>
> Regards,
>
> Doug Goff
>
> [EMAIL PROTECTED]
> www.woodntractors.com
> Scale Tractors In Wood
>
>
>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
