Hmm... I think I've missed this feature. What was the original purpose? It
could solve a measurement scanning problem for me. :)
Regards,
Sven
2008/8/12 Organic Engines <[EMAIL PROTECTED]>
> Hi Craig,
>
> > 1. Software to Generate basic G-code from a sequence of positions
> > should not be a very difficult problem.
>
> I was thinking there would need to be a time component though. A click
> track.
>
> > 2. It would seem to me that welding a good bead (not spot welding)
> > would require either very consistent materials or some feedback on
> > puddle properties. Puddle properties could be measured from a visual
> > and/or IR image. Measuring welding voltage/current might also be useful.
> > (It has been some years since I considered this problem, so good
> > technical solutions may since have been found.)
> > Craig
>
> Yeah, consistent materials and a solid jig is what I am hoping will do
> the trick. Weld seam tracking and all that jazzy stuff is probably
> overkill, but can be added if necessary.
>
> I think if EMC can record my welding with the joysticks accurately
> enough, dwell this long at this amperage, feed this much wire, etc. all
> will be well.
>
> Dan.
>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
