My mill isn't fully functional yet and I neglected to realize the ramifications of this. A bracket I needed to make required a tool change, so I decided to just do it manually. I checked the program by lowering the knee and single stepping through the program, which at the time seemed okay. I raised the knee, started the program and drilled the holes. The table homed for the tool change displayed the tool change message and proceeded to go ahead with the program without stopping. Unfortunately, the new tool that didn't get changed is shorter so the tool collided with the table. I tried to click the e-stop button in AXIS but it had no effect. Then I realized that the tool change message had the window focus and I needed to clear it before the e-stop would work. I realize I made a few mistakes here, by not having a proper config file and a hardware e-stop button, but I wonder if there should be a way to have the AXIS e-stop always on top and available.
-- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
