On Sat, 2008-06-07 at 13:06 -0500, Jon Elson wrote: ...snip > would put the PWM duty cycle at 50%, the worst case. What is > your DC supply voltage? > > Jon
53 VDC unregulated with 500 uF of filter caps. So far the motor has had no load. If you need more information let me know. If you want, I could also ship this setup to you. On the other hand, I was just being curious and currently have no application that will use this configuration. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
