Hi, I'm milling a tapered hole using helical interp. The program works fine but can't keep up. With a HSS ball mill I've been millling at 4 ips. With carbide I could raise that to 10 ips.
At either speed it maintains speed 'til about 1/2 way thru the program then starts to pause and go, pause and go., etc. I tried G64 P0.001 and that didn't help. Am I missing something? The following is a snip of the code about 1/2 way thru the program. 242X.0306Y-.0468Z-.1181 N243X.042Y-.0366Z-.1186 N244X.0502Y-.0238Z-.1192 N245X.0546Y-.0094Z-.1197 N246X.0549Y.0057Z-.1202 N247X.0511Y.0203Z-.1207 N248X.0436Y.0332Z-.1212 N249X.0329Y.0436Z-.1218 N250X.0198Y.0507Z-.1223 N251X.0053Y.0539Z-.1228 N252X-.0094Y.0532Z-.1233 N253X-.0233Y.0485Z-.1239 N254X-.0354Y.0402Z-.1244 N255X-.0448Y.0291Z-.1249 N256X-.0508Y.0158Z-.1254 N257X-.053Y.0015Z-.1259 N258X-.0512Y-.0128Z-.1265 N259X-.0457Y-.0261Z-.127 N260X-.0368Y-.0373Z-.1275 Dave ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
