I used something like this. I believe there are 90 watt ones out there as well. Without much moving in the box there is no need for a great deal of power. As you can see from your next post.
Rayh http://www.idotpc.com/thestore/pc/viewPrd.asp?idcategory=10&idproduct=262 --- [EMAIL PROTECTED] wrote: From: Greg Pettit <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Subject: Re: [Emc-users] micro ATX with on-board video inside NEMA style enclosure Date: Thu, 28 Feb 2008 13:09:07 -0500 Hi Ray, Wow those Jetway boards are pretty cool and with the parallel port not being on the back plane, they should work well in an enclosure. I found a J7F2WE1G5-OC-LF on the new egg website. I am not sure what the 5 in the part number means, I guess I will have to give the guys over at Jetway a call. http://www.newegg.com/Product/Product.aspx?Item=N82E16813153092 Is this the power supply you were referring to? JetWay Model JAD12VB 80W DC-DC 12V power supply http://www.newegg.com/Product/Product.aspx?Item=N82E16813998007 I got to have one! Thanks again, Greg [EMAIL PROTECTED] wrote: > Hi Greg > > Found it on a customer's LAN. Jetway 7F2WE1G-OC-LF. I asked an engineer at > Jetway > how long they would be making this board and he indicated about 5 more years. > They > do have a version without the tv interface but they seem to be really scarce. > > > The parport is a 26 pin header behind the plugs so I was able to modify the > NEMA box > with a small cutout for mouse, kbd, and display connectors without fighting > the > parallel port cable. Went to a local used computer store and found a few > dozen cables > with the right ends. > > Ray > > > > --- [EMAIL PROTECTED] wrote: > > From: Greg Pettit <[EMAIL PROTECTED]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: Re: [Emc-users] micro ATX with on-board video inside NEMA > style enclosure > Date: Wed, 27 Feb 2008 20:52:49 -0500 > > Not a bad idea. I have a PC that I would like to put through the > bandsaw! John nice blog. > > Dave, do you know where I could find out which Jetway board that Ray may > have used? I did a quick search but I didn't find anything. > > Thanks, > Greg > > John Kasunich wrote: >> Ed wrote: >>> Greg Pettit wrote: >>>> The problem I have is that even after sever months, my drives, computer, >>>> and power supplies are still sitting on a cart. So I thought I would >>>> clean things up by putting all the components in a NEMA style enclosure >>>> and mounting it to the base of the mill. >>>> Anyone >>>> mounted an ATX motherboard in a NEMA enclsoure and fabricated a bracket >>>> for the PCI cards? >>>> >>> How about chopping apart an ATX case and using the relevant section. >>> Attachment holes and brackets all in one piece. Ed. >>> >> That's what I did. I attacked an old Gateway tower with various >> implements of destruction until I had something that held all the >> necessary bits and would fit in my NEMA box. >> >> Note: an optical drive is NOT a necessary bit - if you are connected to >> a network (highly recommended), the only time you'll need a CD-ROM drive >> is to do the initial install. For that you can just plug the drive in >> and balance it somewhere temporarily. >> >> More info and photos in this blog posting: >> http://jmkasunich.dyndns.org/cgi-bin/blosxom/shoptask/pc-cased-and-mounted-12-14-07.html >> >> Regards, >> >> John Kasunich >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
