Hi Steve, Hope all is well with you.
See the National Electrical Code, NFPA 70, Article 210.8 for the list of locations that require GFCI in the US. In Canada, see Canadian Electrical Code, Part I, CSA C22.1, Rule 26-704 and 26-710, as well as other locations for GFCI requirements. Best regards, DON GIES Field Service Engineer [cid:[email protected]] p +1 346 313 6216 e [email protected] w gutor.com 17 Capitol Reef Road Howell, NJ 07731 United States [cid:[email protected]] General From: sgbrody <[email protected]> Sent: Monday, March 25, 2024 21:18 To: [email protected] Subject: [PSES] GFCI Receptacles [External email: Use caution with links and attachments] ________________________________ Esteemed experts: It has always been what I thought was the requirement for GFCI receptacles was only when the product or system was intended for a wet or damp location. A system a client is having an NRTL fo a Field Evaluation on had receptacles and they are being told they need to be GFCI. NFPA-79 15.1.1 requires this only for receptacles to be used for, e.g., handheld power tools, test equipment, and other accessories. The questions are: - What is the definition of accessories as used in NFPA-79, - And is it written in any other standard where and when GFCI outlets are required? Thank you. Sent from my T-Mobile 5G Device ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected]<mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
