I am trying to locate replacement semi-rigid cables cables for my old HP 8546A EMI Receiver. The HP/Agilent/Keysight part number is 85460-20036 but are no longer available from any source that I can find. These are the (3) cables with type N connectors joining the EMI receiver (top box) to the RF Pre-Selector section. They are about 5 inches long in a semi-circular shape.
My last resort would be to have some made, but I thought I would ask here in case someone knows of a source for these or other instruments that might use these same cables. adTHANKSvance, Bob ________________________________ Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
