Brian If you have integrated a FCC module, with modular certification, your product label should state "contains FCC ID:XXXXXXXXXX" where XXXXXXXXXX is the FCC ID of the module.
Unless you have separately certified your product as a radio transmitter, there's no other FCC ID label for you to apply and your strategic partner would apply the same label. Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Brian Gregory <[email protected]> Sent: Tuesday, December 12, 2023 10:06 PM To: [email protected] Subject: [PSES] FCC label for White Labeled products Hello experts, Our existing product label has our FCC ID, just under the FCC logo in the classic form: xxxxx-yyyyy, where xxxxx = the FCC ID of the imbedded, compliant WiFi model ("Grantee Code" in FCC lingo), and yyyyy = our product name, per the UL label. ("Product Code" ). We're trying to offer a label to our strategic partner who is selling the same product under their product name: zzzzz. So, it seemed obvious to label that product's FCC ID as xxxxx-zzzzz. I'm trying to confirm this from FCC on this, and can't find much in the way of official guidance, nor any response from the help ticket I pulled nor on our FRN registration page. Anybody else have experience with alternate product codes on FCC labelling? Colorado Brian ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
