Has anyone come across a Maximum HV Bus Voltage Impulse test before and how did they implement it?
This test starts with a steady state at 850V then has a 1.5mSec Rise Time to 1200V and immediately drops 1.5mS Fall time back to 850V. The impulse being a triangular waveform. Trying to work out the best way to implement, not sure of the impedance yet but I am thinking we're driving at least 30 amp load Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
