On Mon, 6 Nov 2023 15:56:55 +0100, Amund Westin <[email protected]> wrote:
> I can’t find any reference to A2:2021 in any EMC Harmonized standard list. > > Does it mean we should not make any reference to in in the DoC? For Directive 2014/30/EU and similar directives/regulations, as it is also written in the DoC template in Annex IV, although such non-harmonised standards will not give "presumption of conformity", I believe we can make reference to any standards: ... 6. References to the relevant harmonised standards used, including the date of the standard, or references to the ****other technical specifications****, including the date of the specification, in relation to which conformity is declared: ... If the product also comply with the harmonised edition of the standard (EN 55011:2016+A1:2017+A11:2020), maybe you can simply make reference to the harmonised edition instead. Regards, Tom - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
