Wouldn't this fall under the requirement from 60204-1 clause 5.3.5 for Excepted Circuits? "Permanent warning label(s) shall be appropriately placed in proximity to the operating means of the supply disconnecting device to draw attention to the hazard"
Best regards, Mark Stultz | CMSE(r) | Sealed Air | AUTOBAG(r) brand Equipment | Streetsboro, OH | 330-342-2402 From: Doug Nix <[email protected]> Sent: Wednesday, August 2, 2023 5:24 PM To: [email protected] Subject: [PSES] Hazard warning labels on panel doors where COTS UPS installed? CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. Colleagues, I have a client who has installed a COTS UPS in an industrial control panel. The UPS is being used to keep the HMI alive in a power outage or if the disconnecting device is switched off. I have scoured the resources that I have, and I can find nothing that requires a label on the outside of the panel to indicate that there is a UPS inside. EN 60204-1:2018 does not address this. I have a copy of EN IEC 62040-1, and it does not require a hazard warning label anywhere. Any guidance you might offer is appreciated. Doug Nix [email protected]<mailto:[email protected]> +1 (519) 729-5704 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
