Hello all,
Thanks for the replies. I got to the bottom of my issue. All of clause 6.7 only applies to Hazardous Live voltages. This voltage is not above the threshold so these requirements for insulation do not apply. Thanks and all the best James James Pawson Managing Director & EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy <http://www.unit3compliance.co.uk/> www.unit3compliance.co.uk | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 Office hours: Every morning my full attention is on consultancy, testing, and troubleshooting activities for our customers' projects. I'm contactable between 1300h to 1730h from Monday to Friday. For inquiries, bookings, and testing updates please send us an email on <mailto:[email protected]> [email protected] or call 01274 911747. Our lead times for testing and consultancy are typically 4-5 weeks. From: James Pawson (U3C) <[email protected]> Sent: Wednesday, May 10, 2023 5:42 PM To: [email protected] Subject: [PSES] EN/IEC 61010-1 insulation question Hello experts, it's me again, with another safety question. May I ask for your thoughts on a clause in EN 61010-1? This is about the difference between 6.7.2 and 6.7.3. The attached sketch explains my thinking. The circuit is a 24Vdc secondary circuit derived from an AC/DC SMPS. Questions: 1. Does 6.7.3 apply for the clearance between the secondary winding and earth as indicated? 2. If NO to 1) then what parts should this insulation be between? 3. If YES to 1) then: a. what is the safety hazard that is being addressed by applying Basic insulation values from Table 6 here? b. Why isn't this shown on Figure D.1e) as being required? 4. If the working voltage between terminals X and Y in the sketch is less than the Hazardous Live thresholds in 6.3.1 then it is be permitted to be present on an Acccessible external terminal, correct? 5. Earthing either end of this winding will make 6.7.3 redundant, correct? Thanks in advance. All the best James James Pawson Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy <http://www.unit3compliance.co.uk/> www.unit3compliance.co.uk | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
