Please could someone advise me on what standard, if any, might compel a
manufacturer to rate the operating voltage of their equipment to at least cover
the utility supply tolerance of the region in which it is being sold?
For example, a DoC for an IT item sold in the UK claims conformance with the
requirements of LVD Directive 2014/35/EU and EN62368-1:2014+A11:2017 but it is
not clear to me that the specified voltage rating of 100 - 240 Vac necessarily
covers UK utility supply tolerance of up to 253 Vac, or even in much of the EU
at 243.8 Vac.
Thanks,
Phil Agar
EMC Compliance
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
