Steve -- I have not read ISO 13850, but it is a key requirement in my mind that ESTOPs are readily accessible to the operator.
Mike > On 04/20/2023 3:21 PM sgbrody <[email protected]> wrote: > > > Experts, > > Have read through EN ISO 13850 know that an ESTOP can be a button on the > machine, or a floor mounted foot actuator, or a rope pull. > > The option my client's customer would like is a post, lagged to the > floor, that has the ESTOP mounted on it. > > I can't give you information on the system other than to say that there > are carts 90 degrees to each other and due to the size of the carts, an ESTOP > can't be reached by an operator if it was mounted on the frame that the carts > attach to. > > And so the question about post mounted ESTOPS. The posts would marked to > prevent becoming a tripping hazard. > > Thoughts? > > > Sent from my T-Mobile 5G Device > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] mailto:[email protected] > > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) http://www.ieee-pses.org/list.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <[email protected] mailto:[email protected] > > > For policy questions, send mail to: > Jim Bacher <[email protected] mailto:[email protected] > > David Heald <[email protected] mailto:[email protected] > > > > --------------------------------------------- > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
