Mike Sherman
-On 04/18/2023 11:31 AM Scott Aldous <[email protected]> wrote:
Be careful. Appliance connectors are AU Level 3 equipment. You can find the full list in AS/NZS 4417.2.
On Tue, Apr 18, 2023 at 9:27 AM Ryan Jazz <[email protected]> wrote:
-Hello List Members,
An update that the NRTL withdrew their request for the “Australia/NZ” approvals document for the appliance inlet
The IEC certificate was acceptable.
Sincerely,
Ryan Jazz
Ryan Jayasinghe
Regulatory Compliance Engineer
"After silence, that which best expresses the inexpressible, is music" - Aldous Huxley
LINE6
26580 Agoura Road
Calabasas CA 91302
From: Ryan Jazz
Sent: Monday, April 17, 2023 1:36 PM
To: [email protected]
Subject: Are Australia/New Zealand approvals needed for IEC 60320 Appliance Inlet ?
Dear list members,
We are trying to get a CB Report for our guitar amplifier from our local NRTL.
For the Australia/New Zealand deviations they are asking us to provide an ‘Australia/NZ’ approval document for the appliance inlet.
Is this a new requirement, I always thought Australia/New Zealand accepts IEC approvals.
If it is a new requirement does anyone know the regulation name or standard number.
Thank you,
Sincerely,
Ryan Jazz
Ryan Jayasinghe
Regulatory Compliance Engineer
"After silence, that which best expresses the inexpressible, is music" - Aldous Huxley
LINE6
26580 Agoura Road
Calabasas CA 91302
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.htmlFor help, send mail to the list administrators:
Mike Cantwell <[email protected]>For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
--
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.htmlFor help, send mail to the list administrators:
Mike Cantwell <[email protected]>For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
