Colleagues, I was discussing the application of the RED with someone this week, and this question came up:
If a product has WiFi or Bluetooth transceivers populated on a board, but they are disabled via software, is that sufficient to exclude the product from the RED, or would the transceiver hardware need to be removed from the product? If the software switch was used, the end user would not be able to enable the transceivers. Doug Nix [email protected] +1 (519) 729-5704 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
