Afternoon all.
The TRF was designed for use by well-established test labs with experienced test personnel who are familiar with all the “unspoken requirements” that lay behind those actually stated. As such they are a nightmare for manufacturers’ own engineers to try to understand, interpret and provide relevant AND ACCURATE compliance data. I know that because I had to do that for an earlier edition of 62368-1 – and finished up with a set of requirements and relevant simple Yes/No/Not Applicable questions which came to a 200+ page document (and that was without the actual compliance data which the engineers then had to provide and document)! Therefore, I don’t think that the TRF itself is the place to start for inexperienced companies and their engineers! John E Allen W. London UK PS: I’ve said the above before on this forum – but I think it was worth repeating! AFrom: James Pawson (U3C) <[email protected]> to To: [email protected] Subject: Re: [PSES] IEC/EN 62368-1 Test report template Hi Amund, If you have the money you can buy these from the IEC - https://webstore.iec.ch/publication/68495 - but they aren’t cheap (cue the Yorkshire War Cry of “ ‘ow much? ”) If you have the time, you can search for “EN 62368-1:2014 test report”, see the format, and copy/paste/mess around with formatting until you have a suitable document. This is what I did. Having filled in a proper TRF befor, I (personally) strongly dislike of the formatting choices. I don’t believe there is a formal requirement to have a safety assessment report in IECEE TRF format, but there may be an informal expectation. All the best James James Pawson Managing Director & EMC Problem Solver Office hours: My mornings are reserved for full attention on consultancy, testing, and troubleshooting activities for our customers’ projects. I am otherwise contactable between 1300h to 1730h from Monday to Friday. For inquiries, bookings, and testing updates please send us an email on <mailto:[email protected]> [email protected] or call 01274 911747. Our lead times for testing and consultancy are typically 4-5 weeks. Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy <http://www.unit3compliance.co.uk/> www.unit3compliance.co.uk | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 From: Amund Westin <[email protected] <mailto:[email protected]> > Sent: 31 August 2022 07:50 To: [email protected] <mailto:[email protected]> Subject: [PSES] IEC/EN 62368-1 Test report template We are considering a review of the standard IEC/EN 62368-1. A test report template would be helpful. Anyone who sell such a template? BR Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
