Dear Bart,
As the input is within the LVD limit, the whole equipment is.
EN 61326-1 comes to mind for EMC
EN 61010-1 for electrical safety
The output is just a "circuit" (in terms of 61010) and clearance and
creepage requirement (up to 60 kV) are given in Table 6 and 7
There are more requirements than just clearance and creepage.
Good luck in making your equipment safe.
Gert Gremmen
On 18-8-2022 21:43, [email protected] wrote:
Dear experts,
A client is looking for regulatory guidance to CE certify a high
voltage output supply (with regular AC mains 230V/50Hz input).
The supply has an output voltage upto 25kV (upto 50kHz) output. It
concerns a supply to be used for plasma reactor applications.
As the output voltage is not inside the voltage limits for the Low
Voltage Directive, the LVD directive is not applicable?
The Machine Directive also excludes these high voltage products.
So, wondering which Directive to apply related tot he safety testing
part. (The General Safety Product Directive?)
Any suggestions as to which safety standard to apply for such products?
Any suggestions are highly appreciated.
Thanks !
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. To post a message to the list, send your
e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
------------------------------------------------------------------------
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
--
Independent Expert on CE marking
EMC Consultant
Electrical Safety Consultant
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
begin:vcard
fn:Gert Gremmen
n:Gremmen;Gert
adr:;;Lieu Dit Pirot;Chauffailles;;71170;France
email;internet:[email protected]
tel;cell:+33 7 84507010
note;quoted-printable:Independent Expert on CE marking =
=0D=0A=
Harmonised Standards (HAS-) Consultant @ European Commission for RED, LVD=
and EMC=0D=0A=
EMC Consultant=0D=0A=
Electrical Safety Consultant=0D=0A=
x-mozilla-html:TRUE
version:2.1
end:vcard
