>From what I’ve seen on-line they are in the mandatory evacuation area, but not >the area burned by the fire. It will be interesting to see if any of their >people are in their booth next week at the IEEE International Symposium on >EMC/SIPI in Spokane, WA. I’ll be looking for them while I’m there.
Ghery S. Pettit From: Manny Barron <[email protected]> Sent: Thursday, July 28, 2022 1:48 PM To: [email protected] Subject: Re: [PSES] Status of CKC lab in Mariposa My home is about 40 miles SE from CKC Labs in Mariposa, CA, which is about 40 miles SW of Yosemite Valley, CA. We live in wildfire territory, my property is located just a few miles from the Sierra National Forest. So any fires in the area always get my immediate attention after having to evacuate for a week due to the very large "Creek Fire" 2 years ago (which came within 5 miles of my home). The wildfire burning near Mariposa has been named the "Oak Fire" incident by Cal-Fire, here's their website link: OAK FIRE https://www.fire.ca.gov/incidents/2022/7/22/oak-fire/ The address for CKC Labs in Mariposa is located within the "red" highlighted area of the fire map at this link. This means they are affected in some way, whether an evacuation warning, an evacuation order, or they're actually in the active burn zone. There's no mention of the wildfire on the CKC website, so the only way to know for sure is a phone call. I worked for CKC Labs back in the 1990's, managing their Brea, CA laboratory. Hoping and praying for the best outcome during this dangerous fire season. Manny Barron On Thu, Jul 28, 2022 at 7:25 AM Charles Grasso <[email protected] <mailto:[email protected]> > wrote: As I recall - CKC had a three EMI labs in Mariposa. Does anyone know of the status of the labs vis-a-vis the fire.? -- Charles Grasso Dish Technologies (c) 303-204-2974 (w) 303-706-5467 (h) 303-317-5530 (e ) [email protected] <mailto:[email protected]> (e2) [email protected] <mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
