Amund There's not really been any change in what a UKCA Conformity Assessment Body (CAB) must do and what a EU Notified Body must do
Furthermore, the technical requirements of the UK regulations have not changed since Brexit, so are same as EMCD, LVD, RED The product might be unchanged in 10 years, but "state of the art" the EMC has changed, so depending on the product, and the EMC environment it is used in, some updated assessment may be required. Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Amund Westin <[email protected]> Sent: 28 June 2022 07:11 To: [email protected] Subject: [PSES] UKCA What is your experience: * Will a UKCA Notified Body normally approve the use of old test results (approx. 10 years old EMC report) under a conformity assessment today? We are preparing for some EMC testing, but wanted to re-use some results, to keep down the scope as much as possible. The product is unmodified since last test, even some uncritical components (passive) have been changed during the years. I realize that re-use of 10 years old test results sounds on the edge of what is reasonable, but I'm mostly interested in the UKCA procedure regarding use of past results, no matter how old they are. Thanks! BR Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
