Dear David, Last week, I encountered a similar issue and would like to share with you. We received a compliance report using EN 55032 : 2015/A1 : 2020, no A11 : 2020 from our supplier. The test house applied the latest amendment of A1 only for their customer. Considering that the product was updated from EN 55032 : 2015 and A11 just added Annex ZZ updating EN 55032 : 2015 in complying with the latest EMC Directive 2014/30/EU instead of previous Directive 2004/108/EC - No technical changes, we suggested the supplier to give us the previous compliance report of EN 55032 : 2015 and A11 statement. The A1 : 2020 has not been harmonised and listed in OJEU. We can wait for corresponding action until further development in OJEU.
Best regards, Scott On Wed, 27 Oct 2021 at 16:40, David Shidlovsky <[email protected]> wrote: > Hello > > I have seen EN 55032-2015 listed with either A1-2020 or A11-2020. > > Is there any difference between them or is it just a typo? > > > > *Best Regards,* > > *David Shidlowsky* > > *Technical Reviewer* > > *Address 1 Bat-Sheva St. POB **6117**, LOD**7120101 **Israel * > > *Tel: 972-8-9186100 Ext. 213 Direct: 972-8-9186113 Fax: 972-8-9153101* > > *Mail: *[email protected] > > *Web **www.itlglobal.org* <http://www.itlglobal.org/> > > > > *Waze* *ITL*: https://waze.com/ul/hsv8vccn2j > > <https://www.linkedin.com/company/itl-israel-testing-laboratories/> > *https://www.linkedin.com/company/itl-israel-testing-laboratories**/* > <https://www.linkedin.com/company/itl-israel-testing-laboratories/> > > > > > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
