Hi Kim, Not quite official, but take a look at this article equivalent for UK <https://www.conformance.co.uk/2-uncategorised/354-brexit-and-authorised-representatives-in-the-uk> post-Brexit. At the end it addresses your question.
Cheers, Gary Tornquist From: Kim Boll Jensen <[email protected]> Sent: Tuesday, April 5, 2022 5:49 AM To: [email protected] Subject: [PSES] UKCA importer/ representative Hi all When we started understanding the new/coming UKCA rules, we got the impression that all companies selling products to the UK should not only mark the products and make a UKCA declaration of conformity BUT they shall have en importer/authorized representative in the UK (or North Ireland). But now when we read some new official information, we see that they use the wording: if you need to have a representative/importer he shall have address in the UK. Does that mean that not all imported products will require an importer/ representative company with address in the UK? Can some one point me to some official web pages that makes it clear when we need an importer/ representative company with address in the UK? Med venlig hilsen / Best regards, Kim Boll Jensen Bolls Aps 22 99 69 91 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
