Hi Ken, Nope. It’s an industrial robot, so outside the scope of IEC 61326. IEC 60204-1 is the dominant standard in that sector, however, not relevant for US and Canadian markets.
CISPR 11 and IEC 61000-6-2 and -6-4 are the EMC standards. The question is: How does this relate to FCC requirements? Doug Nix [email protected] +1 (519) 729-5704 > On 7-Mar-22, at 12:03, Ken Wyatt <[email protected]> wrote: > > Hi Doug, wouldn’t this fall under IEC 61326 as an industrial product? That > standard specifies CISPR 11 and it would fall under Class A (industrial > environments). As such, I suspect the FCC would consider ISM products as > exempt from Part 15 (except for the non-interference clause). > > Ken > > _______________________ > > I'm here to help you succeed! Feel free to call or email with any questions > related to EMC or EMI troubleshooting - at no obligation. I'm always happy to > help! > > Kenneth Wyatt > Wyatt Technical Services LLC > 56 Aspen Dr. > Woodland Park, CO 80863 > > Contact Me! <http://www.emc-seminars.com/page1/Contact.php> New Books! > <https://www.amazon.com/Kenneth-Wyatt/e/B00SNQ1LJ2> > > > <EMC TS Vol1 Cover.jpg> <EMC TS Vol2 Cover.jpg> <EMC TS Vol3 Cover SM.jpg> > > Web Site <http://www.emc-seminars.com/> | Blog <https://design-4-emc.com/> > The EMC Blog (EDN) > <https://www.edn.com/electronics-blogs/4376432/The-EMC-Blog> > Subscribe to Newsletter > <http://www.emc-seminars.com/Newsletter/Newsletter.html> > Connect with me on LinkedIn <https://www.linkedin.com/in/kennethwyatt/> > >> On Mar 7, 2022, at 9:58 AM, Doug Nix <[email protected] <mailto:[email protected]>> >> wrote: >> >> Colleagues, >> >> I am trying to get a handle on the FCC requirements for autonomous mobile >> industrial robot products. For an example of a similar product, see the 6 >> River Systems machines: https://6river.com <https://6river.com/>. >> >> The WiFi/Bluetooth module used in the product is pre-qualified, so I think >> that aspect is covered. What I’m concerned about are the rest of the >> emissions from the onboard electronics/PC/motor drive, etc. Does all of this >> fall under Part 15, Class B? As far as international requirements are >> concerned, the devices fall into CISPR 11 / EN 55011 Group 1, for use in a >> Class A environment. >> >> Doug Nix >> [email protected] <mailto:[email protected]> >> +1 (519) 729-5704 >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <[email protected] <mailto:[email protected]>> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> <http://www.ieee-pses.org/emc-pstc.html> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ >> <http://product-compliance.oc.ieee.org/> can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> <http://www.ieee-pses.org/listrules.html> >> For help, send mail to the list administrators: >> Scott Douglas <[email protected] <mailto:[email protected]>> >> Mike Cantwell <[email protected] <mailto:[email protected]>> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected] <mailto:[email protected]>> >> David Heald <[email protected] <mailto:[email protected]>> >> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
signature.asc
Description: Message signed with OpenPGP
