Hi Chris Firstly, ‘RoHS2’ and ‘RoHS3’ means different things to different people, so it is probably best to refer to the specific legislation e.g. EU Directive 2011/65/EU.
Under this Directive, the concentration limits for the 4 phthalates (that were added by Delegated Directive (EU) 2015/863) is 0.1% by weight in each homogeneous material, however small. Chris > On 3 Mar 2022, at 14:26, Chris Willette > <[email protected]> wrote: > > Hi > > Within RoHS3 is there allowable tolerance content for the 4 new substances, > eg. It is less than 2 grams it is not applicable? > > Have a connector which is RoHS2 compliance it does not meet RoHs3, because of > a very small O-ring around > the connector’s perimeter. Within RoHS3 is there an allowable content for a > very small piece or is it zero tolerance? > > I believe RoHS3 has zero tolerance other than the % listed, but was curious > if others had a similar situation > where a very small piece of a component didn’t meet RoHS3 but majority of > component met RoHS3? > > Thanks > > ---------------------------------------------- > > This e-mail and any attachments may contain information that is confidential > to Ross Video. > > If you are not the intended recipient, please notify me immediately by > replying to this message. Please also delete all copies. Thank you. - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
