Hi Chas and the group, Why not just turn down the RF power on your router a bit? Doing this also improves security. You can also change channel assignments as well but that may require coordination with the others in the building. But lowering the power level does not. Just set it to be adequate in your space.
Doug [cid:[email protected]] From: Charles Grasso <[email protected]> Sent: Wednesday, February 2, 2022 11:45 To: [email protected] Subject: [PSES] Minimizing EM radiation from a 5G multi device test lab Greetings from snowy Colorado! We have multiple WIFI devices in a lab and we need to suppress the RF signals (NOT EMI) to reduce the interference from affecting other WIFI areas of the building. Does anyone know of a cheap and effective way of doing this? TIA Chas -- Charles Grasso Dish Technologies (c) 303-204-2974 (h) 303-317-5530 (e ) [email protected]<mailto:[email protected]> (e2) [email protected]<mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=c9NR2mGfldry-2pM9Bbuww&m=i1FHuxVpqHb2zVzgGLxA5VxCwh4jE0l9QpekXYG_YOQ&s=5M1a-FbR4AgGaTK0hazPNOc-tx3Bl0P6-oeBPw66ZZw&e=> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=c9NR2mGfldry-2pM9Bbuww&m=i1FHuxVpqHb2zVzgGLxA5VxCwh4jE0l9QpekXYG_YOQ&s=Grrg2XvFXt_ZwQHZNH_a-TXDWgewGuYRlKzcxHVgAEQ&e=> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=c9NR2mGfldry-2pM9Bbuww&m=i1FHuxVpqHb2zVzgGLxA5VxCwh4jE0l9QpekXYG_YOQ&s=zjSGerVJF_VR0kWSupJn6bxSpKW69GBWbjhwm9ukMdM&e=> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=c9NR2mGfldry-2pM9Bbuww&m=i1FHuxVpqHb2zVzgGLxA5VxCwh4jE0l9QpekXYG_YOQ&s=z2R8oFKp4FMCa7kQsCgj3Chk162TzZTBI0X2vlKwP-g&e=> List rules: http://www.ieee-pses.org/listrules.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=c9NR2mGfldry-2pM9Bbuww&m=i1FHuxVpqHb2zVzgGLxA5VxCwh4jE0l9QpekXYG_YOQ&s=fwIH7PWyJrXByHEA-dmddDP5KBJsmYCX2i-6n-m-X_Q&e=> For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
