Dear Pate, In sub-chapter 1.6 of my recent published second volume “Electrical Product Compliance and Safety Engineering” you will find useful references for the applicable standards and EU Directives for the subject product. About RoHS you can refer to sub chapter 3.3. If you do not have already the book I can send you the relevant pages. I hope that above will help.
Best Regards and Be Safe, Steli Steli Loznen, M.Sc., SM-IEEE VP for Technical Activities and Member of BoG IEEE-PSES Convener IEC 62A/MT29+MT 62354 17-3 Shaul HaMelech Blvd. Tel Aviv 6436719 Israel Tel:+972-3-6912668 Fax:+972-3-6913988 Mobile:+972-54-4818816 e-mail: [email protected] From: MIKE SHERMAN <[email protected]> Sent: Monday, December 6, 2021 3:14 AM To: [email protected] Subject: Re: [PSES] machinery that is moving while working, wot CE requirements Pete -- Machinery Safety Directive Annex I, sections 1 and 3, maybe even 4. Look at the 12 December 2012 Guidance for the MSD for detailed interpretations of what's in and out of scope, and how to apply various EHSRs. Might even be some Type C EN and/or ISO standards. Get a manual on line of a similar CE marked product and find their declaration and see when they're using. EMC Directive There are likely vehicle specific EN EMC standards to pay attention to. We prefer working with labs that have experience on what applies and what doesn't re vehicular EMC. WEEE and RoHS Directives You are likely outside of scope as professional off road machinery; the definitions for such equipment vary slightly between these two directives. There are FAQs for these on the official EU website. Noise Directive Read the scope and review the examples carefully. You may or may not be in scope. Homologation This seems to only apply if you will be driving the machine down the highway in traffic, but you might want to check. Can get really messy. Requirements can vary by country as I recall. Mike On 12/05/2021 6:35 PM Pete Perkins <[email protected]<mailto:[email protected]>> wrote: All, I have a client that is producing a machine that moves while working – such as a fork lift or lumber carrier. Trying to understand the CE requirements for such equipment. What Directives apply? What technical standard apply? What other regulatory issues arise? Let me know what the requirements are. :>) br, Pete Peter E Perkins, PE Principal Product Safety & Regulatory Affairs Consultant PO Box 1067 Albany, ORe 97321-0413 503/452-1201 IEEE Life Fellow IEEE PSES 2020 Distinguished Lecturer www.researchgate.net<http://www.researchgate.net/Peter%20Perkins> search my name [email protected]<mailto:[email protected]> Entropy ain’t what it used to be - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
