Another possibility is adjusting power factor to account for the filter effect. This is a common effect and a chamber outfitted with such filters often has remotely-controlled power factor correction. A long time ago, when chamber EMI filters cut in at 150 kHz instead of 10 kHz, the impact wasn¹t as pronounced, but there just isn¹t enough space between a ~1 kHz pass band and 10 kHz 100 dB stop-band for the filters to have zero effect at 400 Hz.
Ken Javor Phone: (256) 650-5261 From: John Woodgate <[email protected]> Organization: J M Woodgate and Associates Reply-To: John Woodgate <[email protected]> Date: Wed, 27 Oct 2021 13:32:22 +0100 To: <[email protected]> Subject: Re: [PSES] Filter Issues [General Use] The filter is probably designed for 50Hz or 60 Hz mains. It probably isn't saturating at a higher input frequency, but your voltage measurements indicate that it may be resonating. I think you need a filter specifically designed for 400 Hz mains. ============================================================================ ========== Best wishes John Woodgate OOO-Own Opinions Only www.woodjohn.uk <http://www.woodjohn.uk> Rayleigh, Essex UK Istae nunc praetereunt nisi non ubicumque On 2021-10-27 10:56, Price, Andrew (Leonardo, UK) wrote: > > > > Hi members > > > > Can anyone offer some advice. > > Have issues with EMC Chamber RF Filter 3 phase. > > Using 115V 400Hz single phase supply from a static convertor, filter looks > like it is saturating. > > Ambient levels failing between 6kHz to 150kHz. > > Voltage of phase at static convertor 115.8Vrms but at EUT on bench 132Vrms > > > > Regards > > Andy > > > > > > Andrew Price > Integrated Sensing & Protection (ISP) > > Prinicpal Environmental Engineer (EMC) > > > > Leonardo UK > Sigma House, > > Christopher Martin Rd, > > Basildon > > SS14 3EL, UK > Tel EMC LAB : +44 (0)1268 883308 > > Mobile: +44 (0)7507 854888 > > [email protected] > <mailto:[email protected]> > > leonardocomapany.com > > HELICOPTERS / AERONAUTICS / ELECTRONICS, DEFENCE AND SECURITY SYSTEMS / SPACE > > > > P Please consider the environment before printing this email. > > > > > > > > > Leonardo UK Ltd > > > Registered Office: 1 Eagle Place, St James¹s, London SW1Y 6AF > > > A company registered in England & Wales. Company no. 02426132 > > > ******************************************************************** > > > This email and any attachments are confidential to the intended > > > recipient and may also be privileged. If you are not the intended > > > recipient please delete it from your system and notify the sender. > > > You should not copy it or use it for any purpose nor disclose or > > > distribute its contents to any other person. > > > ******************************************************************** > - > ---------------------------------------------------------------- > > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=emailclient> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=emailclient> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
