IEC60950-1:
How about the Creepage and clearance requirements for an AC driven radio HUB device. * One input: 230VAC (direct into wall socket) * No physical output ports, just radio communication. * Insulated plastic enclosure (UL94 V-0) The Creepage and clearance requirements between primary and secondary circuits, does it make any sense as long as the device has no cables and is encapsulated by a plastic enclosure I understand that there should be some Creepage and clearance to withstand OVC II (250V transient). Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
