Good morning. 61368-1, Table 14 (2nd ed) or Table 13 (3rd ed) discusses transients to be applied to conductors considered external circuits.
Whereas in 60950-1, these tests generally applied to conductors falling under Clauses 6 or 7, the scope of the applicability of the testing appears to have expanded to include simple IEEE 802.3 circuits that exit a building structure, which were excluded from such testing under 60950-1 (where ITIC had dictated to test houses, "thou shalt not place transients on mine network circuits"). As a relative newcomer to 62368-1, I am looking for confirmation that the above is accurate. Regards, Peter Tarver [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
