Good morning all I have just reviewed the EN 61010-1:2010/A1:2019 and there a lot of changes. Most of them seems clarifications but I am not sure if we need to retest equipment checked for EN 61010-1:2010 to add A1:2029 Does anyone have a clear picture: 1.if retesting is required 2.if yes there is any cases that not (or which clauses requires testing)
Thank you for your answers! Kind Regards / Saludos cordiales / Mit freundlichen Grüßen Daniel Rodríguez Sr. Equipment Compliance Specialist EMEA T +34 673556249 E [email protected]<mailto:[email protected]> ecolab.com CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
