Brian, One of my client's was going to sell into the Ukraine and was told they needed an EAC mark on the product and that the CE was not valid in the EAC. They did not proceed beyond that so I can not give you any further guidance.
You can check EAC 3rd parties on line, I think. I had this discussion with UL as to why Ukraine, and the EAC, would not accept the CB Scheme report, which is why the client went that route, but the answer was that it still needed to go through an EAC 3rd party before they would issue a mark. And that included a physical product review and factory inspection. The unanswered question then was what does the CB report buy me - no response. Client opted not to sell into the EAC. > On 09/22/2020 12:53 PM Brian Kunde <[email protected]> wrote: > > > Greetings All. > > All of a sudden we are having trouble with Ukraine. Before we even ship > our product to the customer, we are being contacted by unknown companies who > claim to be responsible to overlook the installation and perform "complex > protocols" on our product. They are asking for EMC and Safety test reports > among other R&D type of test data. Is this for real? > > Doing a Google search on this topic, it appears as though Ukraine should > accept our CE Marking and Declaration from Europe. However, they are telling > us that their laws changed and they no longer accept the CE marking. > > What is going on? Is there a simple way to satisfy whatever the new > requirements are? > > I appreciate any help you can provide. > > Best Regards, > > The Other Brian > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] mailto:[email protected] > > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site > at http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) http://www.ieee-pses.org/list.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected] mailto:[email protected] > > Mike Cantwell <[email protected] mailto:[email protected] > > > For policy questions, send mail to: > Jim Bacher <[email protected] mailto:[email protected] > > David Heald <[email protected] mailto:[email protected] > > Steve Brody [email protected] mailto:[email protected] C - 603 617 9116 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
